LTE-A CAT7 Outdoor CPE 4*4MIMO/2CA

Detail

Parameters

JT6300D is the LTE-A CAT7 outdoor data unit specially designed to meet the high speed wireless backhaul and fixed wireless access deployments by the 4G service operators. JT6300D can provide Gigabit PoE connection to connect user terminal device such as indoor router or Wi-Fi AP products, They are used for the customer's home or office to provide a larger wireless range and enhance mobility of usage.

JT6300D MTBF time is expected to be above 80,000 hours, It can provide up to 300Mbps max throughput over the air. The typical coverage should be more than 15km with reasonable good throughput performance.

Radio Access	3GPP Release 11, Category 7
Operation Mode	FDD/TDD
MIMO	4Rx, 2Tx, DL 4*4 MIMO, UL QAM64 DL CA (2CC), UL QAM64
Channel BW	5/10/20MHz,FDD+TDD Joint Flexible Carrier Aggregation combination
Output Power	23dBm per Tx
Frequency Band	B7/38/40/41, B42/43/48
Antenna Gain	B7/38/40/41: 14dBi(22 CA) B7/38/40/41: 10dBi(44 MIMO) B42/43/48: 17dBi(22 CA) B42/43/48: 13dBi(44 MIMO)

Dimensions	250mm (L) * 250mm(W) * 75mm(D)
Weight :	<2.5Kg
Power Adapter	Input : 100-240V 50/60Hz 0.75A Output : DC 48V/0.5A (Gigabit PoE)
Power Consumption	< 15W
Data Interfaces	1 RJ45 10/100/1000M ETH Port
LED Indicator	PWR, SYS, NET, SIM, ETH, RF (5 Signal intensity LEDs)
SIM Card	Single SIM card slot (2FF)
Environment	Operating T, -40℃ to 55℃ Storage T, -40º C to 85º C Humidity, 95% max Non-condensing
Industry Standards	IEEE : IEEE 802.3 10Base Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet
Ingress Protection Rating	IP67
Regulary	FCC / CE